What is an eave tray?

Eaves Carrier / Support Trays are designed to bridge the rafters and provide support for the roofing felt. It eliminates the problem of rotting felt caused by the sagging and retaining of water by the felt at low-level eaves.

What is an eave overhang?

The eaves are the edges of the roof which overhang the face of a wall and, normally, project beyond the side of a building. The eaves form an overhang to throw water clear of the walls and may be highly decorated as part of an architectural style, such as the Chinese dougong bracket systems.

What is the overhang on a roof called?

roof eaves
The proper term to use when talking about the roof overhang is to call it the roof eaves. The eaves of a roof refer to the edges that extend beyond the wall face. It forms that overhanging structure which makes sure that the water does not damage the siding of house walls.

Are eave trays necessary?

When using a VPU in a cold pitched roof with high level ventilation it is not necessary to provide eaves ventilation trays but where they have been provided it will assist the removal of water vapour from the roof.

How do you cover eaves?

In some home construction, the eaves are left exposed, which leaves the ends of the roof rafters visible. You can enclose the eaves by installing soffit panels. These are panels made of vinyl or metal that create a solid cover over the eaves.

How do I close eaves?

How to Close Off Eaves

1. Clear the area in your attic near the eaves.
2. Cut the wire mesh to fit across the eave opening.
3. Place the wire mesh across the opening and secure in place using a staple gun or a hammer and nails.
4. Install insulation.

What eave means?

Definition of eave 1 : the lower border of a roof that overhangs the wall —usually used in plural. 2 : a projecting edge (as of a hill) —usually used in plural.

What is the underside of the eaves called?

Soffit: The underside of the eaves, or roof overhang, which can be enclosed or exposed. Soffit Vent: An intake vent in the soffit area of the house that provides attic venting at a lower portion of the roof deck and good circulation with other forms of venting such as ridge or roof vents; also called an intake vent.

What is the difference between fascia and eaves?

is that fascia is a wide band of material covering the ends of roof rafters, sometimes supporting a gutter in steep-slope roofing, but typically it is a border or trim in low-slope roofing while eaves is the underside of a roof that extends beyond the external walls of a building.

How do you install eaves ventilation?

How to Install Soffit Vents

1. Step 1: Make Two Parallel Lines.
2. Step 2: Cut Parallel Lines.
3. Step 3: Connect the Two Cuts.
4. Step 4: Raise the Vent up to the Soffit.
5. Step 5: Attach the Vent to the Soffit.
6. Step 6: Remove Any Insulation From the New Vent.
7. Step 7: Install the Ventilation Baffle.