Can you use SEM vinyl prep on plastic?

Color Coat is not a dye, but a flexible and permanent coating. Available in 50 popular aerosol colors or any custom color with the Color Coat Mixing System, it restores plastic, vinyl, carpet, and velour. Thanks again for sharing, Dave. We’re glad to hear that SEM has stood the test of time.

What kind of paint is SEM?

Use the specially formulated SEM Color Coat Aerosol Coating for changing the color of or reinstating the color on surfaces such as vinyl, carpet, plastics, and velour. Use it to refinish motorcycle seats and vehicle interiors.

How do you prepare vinyl with SEM?

Apply Vinyl Prep or XXX Universal Surface Cleaner and remove by wiping in one direction with a clean, damp cloth and let dry. Clean with SEM Soap and a gray scuff pad per instructions. Apply Plastic & Leather Prep or XXX Universal Surface Cleaner and remove by wiping in one direction and let dry.

How long does SEM take to dry?

Scrub lightly with a nylon bristle brush to remove oil, grease and contaminants. Allow surface to dry and then vacuum. Allow last coat to dry 5-10 minutes.

What kind of paint do you use on plastic car interior?

ColorBond paint for plastic delivers excellent results. Formulated for use as an automotive plastic paint, ColorBond products work equally well with all types of plastic. Our Leather, Vinyl & Hard Plastic Refinisher is a plastic spray paint that won’t crack, chip or peel.

How do you paint plastic interior panels?

Priming plastic parts is a must. SEM and Dupli-Color both make good primers for plastics. They are typically labeled “Adhesion Promoter.” Hold the can about 8-10 inches away and give the parts two wet, even coats. If you get a run in the primer, wait until it is dry, sand it out, then re-prime.

Is SEM good paint?

5.0 out of 5 stars Great paint. I’ve used all the name brand spray paints and always end up coming back to this.

How long does it take for SEM paint to dry?

5-10 minutes
Scrub lightly with a nylon bristle brush to remove oil, grease and contaminants. Allow surface to dry and then vacuum. Allow last coat to dry 5-10 minutes.