How much does 28% nitrogen cost?

Nitrogen cost in 1 ton of 28% UAN = $225 ÷ 560 lbs N = 40 cents per lb N.

What is the difference between 28 and 32 nitrogen?

UAN 28% and 32% are both formulations of the same thing, urea-ammonium nitrate, with a 28% nitrogen on one and a 32 % nitrogen on the other. The reason they have both forms is that 32% is how it’s produced as a full concentrate and it’s used more in southern climates.

What does 28% fertilizer weigh per gallon?

The calculation can be relatively easy if you remember that 28% UAN has 2.9 pounds N per gallon and 32% has 3.5 pounds N per gallon. How did we come up with these amounts? UAN28 weighs 10.6 pounds per gallon, so 10.6 pounds X 0.28 = 2.9 pounds.

How much nitrogen is in liquid fertilizer?

There are 4 quarts in a gallon, so 9 pounds divided by 4 is 2.25 pounds of fertilizer liquid in 1 quart. Your product is 16 percent nitrogen by weight, so 16/100 = 0.16, and 0.16 x 2.25 is 0.36. This means that 1 quart of fertilizer supplies 0.36 pounds of nitrogen.

What is the cheapest nitrogen fertilizer?

Urea: A Low Cost Nitrogen Fertilizer with Special Management Requirements. Urea (46-0-0) usually has the lowest cost per pound of nitrogen compared to other single-element nitrogen fertilizers.

How much nitrogen is in a gallon of 28?

2.996 lbs
And as posted above UAN weighs 10.7 lbs per gallon. 28% liquid has 28 lbs of N for every 100 lbs of product. Every gallon of 28% UAN has 2.996 lbs of actual N so take your target rate and divide it by the 2.996 gives you right at 20 gallon per acres.

How much does 32 nitrogen cost?

UAN32 is 32% more expensive at $604/ton, while urea is up 26% at $820/ton. All are new records for DTN’s database. Potash and DAP prices are 11% higher than last month, at $750/ton and $814/ton, respectively. MAP costs an average of $900/ton, up 9%.

How much does liquid nitrogen weight?

Nitrogen

How much does a gallon of liquid nitrogen fertilizer weight?

It weighs 11.1 pounds per gallon and has a salting-out temperature of about 0°F.

How much liquid fertilizer do I need?

The standard nitrogen fertilizer application rate is 0.1 to 0.2 pounds per 100 square feet. This translates into 0.5 to 1 pound ammonium sulfate, 0.3 to 0.6 pounds of ammonium nitrate or 0.2 to 0.4 pounds of urea. You should do a soil test to ascertain the amount of phosphorus and potassium.

How much liquid fertilizer do I need for 1000 square feet?

The water is the carrier so as long as you are getting the 22 ounces of product per 1000 sq ft you can use as much water as needed, but no less than 1 or 2 gallon of solution per 1000 sq ft. (Solution is the product plus water which should come to 1 or 2 gallon with 2 gallons preferable.)

https://www.youtube.com/watch?v=8cGAUfU_mwA