How do you reset an evolution digital cable box?

FACTORY RESET THE REMOTE CONTROL UNIT

1. Press and hold the Setup button for three seconds until the Indicator LED changes from red to green.
2. Enter 9-8-1 on the remote control.
3. The Indicator LED will blink twice.

What is an Evolution Digital HD Set Top Box?

Evolution Digital’s digital to analog TV converter is a MPEG-4/2 high-definition digital set top box. The DMS-1004HD-CA is designed as a cost-effective solution to help manage the costs of digital migration. Operators can install the ultra-low cost HD DTA in subscriber homes today.

How do I program my digital evolution remote to my TV?

HD Digital Adapter: Evolution Remote Setup

1. Press and hold the Setup button until the light on the remote turns green.
2. Enter the five-digit code for your TV brand. (See the list of common codes for specific TV brands below.)
3. Press the TV Power button. If the TV turns off, the code has been accepted.

How do I pair my digital evolution remote?

Select Remote Control and then select Remote Control Pairing. Press and hold Setup button until the LED Indicator turns green. Press the Menu button (please allow a few seconds for the menu to display). Proceed by entering the pairing code displayed in blue on the pairing code pop-up screen.

How do I fix my DTA cable box?

Unplug the box from power and wait 10 seconds, plug the box back in and the light should flash, wait for the service interruption message. Take the DTA remote and aim at the box, press and hold the INFO button (bottom right on the remote) this will take the DTA into Diag mode.

How do I reset my Comcast HD DTA?

How to Reset a Comcast Digital Adapter

1. Locate the reset button on your Digital Adapter. The button will be located on the front or back of your device and will be marked “Reset.”
2. Press the reset button and hold it for 5 seconds.
3. Release the reset button and allow the DTA to restore.

What is a universal DTA?

A digital television adapter (DTA), commonly known as a converter box or decoder box, is a television tuner that receives a digital television (DTV) transmission, and converts the digital signal into an analog signal that can be received and displayed on an analog television set.

What is Mediacom eBOX?

Evolution Digital’s eBOX® IP Hybrid set-top box is a game changer for the cable industry. Now one device delivers both QAM linear channels and IP video services and gives operators the flexibility to operate the device in multiple modes that best fit the MSO’s business case, today and well in to the future.

How do I program my DTA remote to my DTA box?

Press and hold both DTA POWER and SELECT keys at the same time. Once the red light on the remote turns on, then release both keys. Wait 10 seconds, a 3 digital validation code will display on the TV.

How do I reset my DTA remote?

Here’s a step by step guide to resetting your FPB DTA.

1. Push MENU on the remote.
2. Arrow down until option 3 “setting” is highlighted – DO NOT PRESS OK.
3. Enter 6980 on the remote.
4. Arrow down to Option 3 “Reset Factory Defaults”.
5. Press “OK” on the remote.
6. Press “OK” at the “Reset Type All” screen.

Can I use any power cord with the DTA?

The DTA is provided with a DC 5V IN AC Power Cord. It has been designed to meet the requirements of the DTA. No other power Cord should be used with this set top box unless provided by your cable provider. Digital to Analog Adapter DMS2002U Thank you for choosing the Evolution Digital to Analog Adapter.

Is the DTA compatible with the remote receiver?

compatible with the remote.  The entire front of the DTA needs to be visible from where the customer is using the remote to ensure the remote receiver is not being blocked.  If the customer is using the IR Extender, verify it is visible from where the customer is

How do I Activate my DTA (s)?

Once your DTA(s) are activated you will be able to begin receiving digital TV! To begin activation, ensure you have your serial number(s) and cable account informa- tion available. You must contact your cable operator to activate your DTA. Activating your DTA © 2010 Evolution Digital, LLC. All rights reserved. Ideas to Solutions for a Digital World

What is the evolution digital to analog adapter dms2002u?

Thank you for choosing the Evolution Digital to Analog Adapter. The DMS2002U will allow you to enjoy viewing digital programming on an analog or digital television set. Your cable operator is enhancing the services provided to you. As as result you will need to add this box to your TV.