What is an airbag control unit?

The airbag control unit detects and evaluates the severity of an accident and then triggers the appropriate restraint systems. Information is supplied to the unit by as many as six crash sensors. This includes acceleration sensors and a rotational speed sensor.

Does Bosch make airbags?

Since the start of full-scale production in December 1980, Bosch has manufactured more than 250 million airbag control units, constantly refining the technology all the while.

How much is an airbag control module?

The average cost for air bag control module replacement is between $648 and $673. Labor costs are estimated between $95 and $119 while parts are priced at $554.

What does an airbag control module record?

The EDR is typically found in the airbag control module, although it can be found in the powertrain module on some vehicles. These devices record vehicle and occupant information for a brief period of time leading up to and during a crash. This information can be very useful in the reconstruction of vehicular crashes.

Do you have to replace airbag module?

It is not necessary to replace your airbag control module unless it has been in water flood or fire damage. Send your original module to us for reset and save hundreds! Start your order today!

What is a crash sensor?

A collision sensor is a piece of electronic safety equipment that detects an impact through vibrations. Collision sensors are also known as impact sensors. Collision sensors are used in many industrial settings, including manufacturing and utilities.

Do I need to replace airbag control module?

Can airbag module be reset?

All airbag control modules can be reset and reprogrammed, except modules that were damaged by a flood, fire, or some other kind of damage that impacted the hardware. Airbag control modules store hard and soft codes caused by accidents.

How do you clear an airbag light?

Conclusion – How to Reset Airbag Light

1. Turn your ignition on and off.
2. Restart your vehicle and do a test drive.
3. Examine the passenger airbag switch.
4. Inspect whether seat belts are fastened or working correctly.
5. Verify that the passenger seat sensor is not applied.
6. Use a scanner with an SRS or airbag light reset option.

Can I remove an airbag control module?

In most cars, it is under the center console that is between the two front seats, or center of the dash on the floor. In most GM cars it is under the driver or passenger seat. Disconnect the positive battery cable and wait at least 3 min. You are now safe to unplug the airbag control module harness wiring plugs.