How do you change a flat tire presentation?

HOW TO CHANGE TIRES

1. FIND A SAFE LOCATION. As soon as you realize you have a flat tire, do not abruptly brake or turn.
2. TURN ON YOUR HAZARD LIGHTS.
3. APPLY THE PARKING BRAKE.
4. APPLY WHEEL WEDGES.
5. REMOVE THE HUBCAP OR WHEEL COVER.
6. LOOSEN THE LUG NUTS.
7. PLACE THE JACK UNDER THE VEHICLE.
8. RAISE THE VEHICLE WITH THE JACK.

How do I change a flat tire in art of manliness?

Tools needed: Spare tire, jack, lug wrench.

1. Park your car on a flat surface. If you get a flat while on the road, pull your car as far away from traffic as possible .
2. Remove the hubcap.
3. Loosen the nuts.
4. Place the jack underneath your car.
5. Jack it up!
6. Remove the flat.
7. Slap on your spare.
8. Lower the car.

What are the five steps to change a flat tire?

HOW TO CHANGE A FLAT TIRE IN FIVE STEPS

1. Step One: Get Safe. Before you exit your vehicle, you need to pull over or find a place away from the rush of traffic on the road.
2. Step Two: Grab Your Tools.
3. Step Three: Loosen and Lift.
4. Step Four: Change the Tire.
5. Step Five: Lower and Tighten.

Can I change a flat tire myself?

When a good spare is unavailable, you either have to call a tow truck or fix the tire yourself. Luckily, the process of fixing it yourself is relatively straightforward and requires only a few tools.

Should car be in neutral when changing tires?

DON’T leave the car in neutral You’ll obviously want to leave the engine off before you start the tyre change, but the gearstick should be left in either first or reverse gear. The reason you want to do this is that the handbrake only operates on two wheels, usually the rear wheels to be exact.

Where is the best place to change your flat tire aceable?

You’ll always want the side of the car with the flat tire to be facing away from traffic. Pull over to the side of the road that the flat tire is on to make sure you’re never in oncoming traffic. Make sure you’re on flat ground, turn on your hazard lights, and put on your emergency brake.

What are the hazards in changing flat tire?

Put jack, tire iron and flat tire back into the trunk. Sprain, strain or injury from lifting, turning, reaching, carrying, twisting or over-exertion or improper removal. Crush injury – dropping tools.